How to paint a room
Paint a room in this order: get permission if you rent, clear and cover the floor, wash and patch the walls, tape the trim, then cut in along edges with a brush before rolling the open wall in overlapping sections. Two thin coats beat one thick one. Buy a little more paint than the can's coverage says, and let each coat dry fully.
Why it matters: Paint is the cheapest way to make a place feel like yours.
Steps
- If you rent, get written permission and agree the color and whether you must repaint when you leave.
- Measure the walls and check the coverage on the can to work out how much to buy.
- Move furniture to the middle, cover it and the floor with drop cloths.
- Wash greasy spots, fill holes, sand, and wipe the walls clean.
- Tape along trim and ceiling edges, pressing the tape down firmly.
- Cut in a band a few inches wide along edges and corners with an angled brush.
- Roll the open wall in overlapping sections while the cut-in edge is still wet.
- Let it dry fully, then apply a second coat and pull the tape while the last coat is slightly soft.
Common mistakes
- Skipping wall cleaning, so paint peels on kitchen grease.
- Overloading the roller, which drips and leaves thick ridges.
- Painting a rental without written permission.
Self-check quiz
3 questions. Your score is saved only in this browser.
Teach this to someone
A one page sheet for showing a friend, a teenager or a parent: what to say, what to show, and one question to check it landed.
Teach: How to paint a room
What to say
Paint a room in this order: get permission if you rent, clear and cover the floor, wash and patch the walls, tape the trim, then cut in along edges with a brush before rolling the open wall in overlapping sections. Two thin coats beat one thick one. Buy a little more paint than the can's coverage says, and let each coat dry fully.
What to show
- If you rent, get written permission and agree the color and whether you must repaint when you leave.
- Measure the walls and check the coverage on the can to work out how much to buy.
- Move furniture to the middle, cover it and the floor with drop cloths.
- Wash greasy spots, fill holes, sand, and wipe the walls clean.
- Tape along trim and ceiling edges, pressing the tape down firmly.
- Cut in a band a few inches wide along edges and corners with an angled brush.
- Roll the open wall in overlapping sections while the cut-in edge is still wet.
- Let it dry fully, then apply a second coat and pull the tape while the last coat is slightly soft.
Check question
What comes before rolling the walls?
Answer: Cutting in the edges with a brush. Cutting in first lets the roller blend into a wet edge.
Your checklist
Saved only in this browser.
Written in our own words. It is general information, not advice for your situation; where a professional, your doctor or your lease says something different, follow them.
Published .